Jig saw works fine if you have enough room to manuver it also any drill bit will drill through it includeing hole saws. I prefer a roto zip though especialy when working on the console. Just remember measure twice and cut once and remember it is better to cut to small the first time.

 

Thanks LRM. I didnt know if a regular hole saw would work or not. Was concerned about the possibility of it cracking outwards.

 

wood bits work great for smaller holes.......just don't try to hurry......applying light pressure will ensure a hole with smooth edges and no cracking.


Good luck!

 

Make sure you use sealant for the hole and all fasteners. If possible through bolt and use fender washers or a backing plate. recommend the sealant be 5200 or equivalent.

 

Oh and masking tape the area before cutting with a jig saw.

 

Use all stainless hardware also. Ditto on the 5200.

Make sure you have the clearance from hatch doors, hinges, deck supports, elec wires, etc before you make any cuts.

 

http://www.cabelas.com/products/Cpod0019097.jsp

Johnny...these work great..all you need is a 1-1/2" hole saw...

Just get the round base...

I have a new Air Ride pedestal in my attic you can have for 20.00...a Good seat will run you about 50.00 @ WalMART

 

Thanks LRM. I didnt know if a regular hole saw would work or not. Was concerned about the possibility of it cracking outwards.

Did that on my boat last year using a hole saw. I just took it slow and easy letting the weight of the drill do the work. No problems at all and I love having something to lean on in the front of the boat.

 

A suggestion I've seen many times is to begin with the drill in reverse to avoid/minize any chipping of the fiberglass.

 

Jeff, thanks for the info. I will order the base and take that pedestal off your hands as well. Have never heard of the air rides. Have any info on it?

 

Jeff, thanks for the info. I will order the base and take that pedestal off your hands as well. Have never heard of the air rides. Have any info on it?

They are just pneumatic pistons.....They are good mounts...are you coming my way soon?...or possibly the boat show this weekend?...

Let me kow

 

Dont have any plans to go that way right now. Guess I will just have to make a trip over to meet you. Will let you know when I can.

 

No Problem...it will be there...and I will let you know if I go to PA anytime soon...if I do, I will drop it off @ the MEMORIAL station...that is where you are assigned?..Right?

 

Yep, thats the one. We are also having a nother lunch next week, in case you can make it.