Bow hanging up on trailer bow stop/roller - Page 3 - 2CoolFishing
Home  |  Contact Us  |  Advertise   |   Follow:
Go Back   2CoolFishing > General Interest Forums > Boating Forum
Register FAQ Social Groups Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 10-22-2019, 10:35 PM   #21
full_throttle_27
Registered Users-pm+
 
Join Date: Mar 16 2014
Age: 50
Posts: 31
Rep Power: 178380
full_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateerfull_throttle_27 has been promoted to the rank of Privateer
Curious as to why folks don’t like the teflon bunks that screw down to the carpeted bunks. I have same problem and that seemed like a logical solution so I didn’t have to back the trailer so far into the water.


Sent from my iPhone using Tapatalk
full_throttle_27 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-22-2019, 11:42 PM   #22
richg99
richg99
 
richg99's Avatar
 
Join Date: Aug 21 2004
Location: North Houston (FM1960/Champions area)& Tenn. in the Summers
Age: 80
Posts: 6,564
Rep Power: 21487032
richg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Pirate
Many years ago (most of my posts start like that) I owned a number of Carolina Skiffs. I also ran the MS Carolina Skiff Group way back then. Every CS had the same problem.

I came up with the "Wheel" solution. It appears that a number of commercial products are out now that improved on the design by using better materials. Easy Peezy. richg99
Attached Images
 
richg99 is offline   Reply With Quote Quick reply to this message
Old 10-23-2019, 08:47 AM   #23
bigrebar
Registered Users-pm+
 
Join Date: Oct 31 2012
Location: Padre Island/Wimberley
Posts: 271
Rep Power: 2060860
bigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Pirate
HDPE

Quote:
Originally Posted by full_throttle_27 View Post
Curious as to why folks don’t like the teflon bunks that screw down to the carpeted bunks. I have same problem and that seemed like a logical solution so I didn’t have to back the trailer so far into the water.


Sent from my iPhone using Tapatalk
Many discussions here about the plastic strips. I've put them on ever boat I've ever had without issue. This is a brand new coast line trailer I bought. Ordered it without any carpet on the boards and no fender well wood. In less than an hour and less than $100 bucks, the trailer was done. This particular boat has over 500 hours on it, so it has slid on and off the trailer hundreds of times. I never have an issue launching or loading at any ramp, even by myself. On a steep ramp, the front axle never hits the water.

And by the way, this is on a Bluewave 22 classic, same boat as the OP.

.
Attached Images
 
bigrebar is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-23-2019, 09:15 AM   #24
pipeliner345
2011 21' shallowsport Bahia 150 E-TEC
 
pipeliner345's Avatar
 
Join Date: Mar 14 2010
Location: where ever the RV lands.
Age: 59
Posts: 2,268
Rep Power: 19743247
pipeliner345 has been promoted to Piratepipeliner345 has been promoted to Piratepipeliner345 has been promoted to Piratepipeliner345 has been promoted to Piratepipeliner345 has been promoted to Piratepipeliner345 has been promoted to Piratepipeliner345 has been promoted to Piratepipeliner345 has been promoted to Piratepipeliner345 has been promoted to Piratepipeliner345 has been promoted to Piratepipeliner345 has been promoted to Pirate
Quote:
Originally Posted by full_throttle_27 View Post
Curious as to why folks don’t like the teflon bunks that screw down to the carpeted bunks. I have same problem and that seemed like a logical solution so I didn’t have to back the trailer so far into the water.


Sent from my iPhone using Tapatalk
I've had those for couple years now. I'm going to have to inspect the hull of my shallowsport because I'm getting some good wear on the edges and i need to look at the gelcoat. I'm seeing a lot of dust buildup.

Sent from my SM-N960U using Tapatalk
pipeliner345 is online now   Reply With Quote Quick reply to this message
Old 10-23-2019, 01:22 PM   #25
SeaIsleDweller
Registered Users-pm+
 
SeaIsleDweller's Avatar
 
Join Date: Jun 27 2013
Location: Galveston/Crosby
Posts: 1,176
Rep Power: 3856657
SeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to Pirate
Quote:
Originally Posted by bigrebar View Post
Many discussions here about the plastic strips. I've put them on ever boat I've ever had without issue. This is a brand new coast line trailer I bought. Ordered it without any carpet on the boards and no fender well wood. In less than an hour and less than $100 bucks, the trailer was done. This particular boat has over 500 hours on it, so it has slid on and off the trailer hundreds of times. I never have an issue launching or loading at any ramp, even by myself. On a steep ramp, the front axle never hits the water.

And by the way, this is on a Bluewave 22 classic, same boat as the OP.

.

Good info, what type of material do you use for the bunks? Is it starboard or just HDPE? .... i know they are similar just ones a lot mote expensive. Also your coast line trailer has the bunks set alot lower and your bow stop is a lot lower than the mc clain I have so that probably plays a large factor. With my trailer setup the boat rides pretty high on the trailer.
SeaIsleDweller is offline   Reply With Quote Quick reply to this message
Old 10-23-2019, 01:22 PM   #26
SeaIsleDweller
Registered Users-pm+
 
SeaIsleDweller's Avatar
 
Join Date: Jun 27 2013
Location: Galveston/Crosby
Posts: 1,176
Rep Power: 3856657
SeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to PirateSeaIsleDweller has been promoted to Pirate
Quote:
Originally Posted by richg99 View Post
Many years ago (most of my posts start like that) I owned a number of Carolina Skiffs. I also ran the MS Carolina Skiff Group way back then. Every CS had the same problem.

I came up with the "Wheel" solution. It appears that a number of commercial products are out now that improved on the design by using better materials. Easy Peezy. richg99
i like the big "wheel" idea .. very cool that you came up with it before it was mainstream. thanks for the info.
SeaIsleDweller is offline   Reply With Quote Quick reply to this message
Old 10-23-2019, 01:48 PM   #27
TXFishin
Relentless
 
TXFishin's Avatar
 
Join Date: Apr 25 2010
Location: Cypress, TX
Age: 46
Posts: 2,368
Rep Power: 11450200
TXFishin has been promoted to PirateTXFishin has been promoted to PirateTXFishin has been promoted to PirateTXFishin has been promoted to PirateTXFishin has been promoted to PirateTXFishin has been promoted to PirateTXFishin has been promoted to PirateTXFishin has been promoted to PirateTXFishin has been promoted to PirateTXFishin has been promoted to PirateTXFishin has been promoted to Pirate
No issues with sand, dirt, salt, causing scratches with teflon bunks?

Carpet could also be prone to this, but the standards of carpet would make it easier to conceal and particles and be less prone to scratching the hull as opposed to a slick surface

Relentless
TXFishin is offline   Reply With Quote Quick reply to this message
Old 10-23-2019, 05:12 PM   #28
bigrebar
Registered Users-pm+
 
Join Date: Oct 31 2012
Location: Padre Island/Wimberley
Posts: 271
Rep Power: 2060860
bigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Piratebigrebar has been promoted to Pirate
I buy plain old half inch thick HDPE from any plastic provider. You can beat those prices by buying on line. It's easy to cut and drill.

I'm sure there may be scratches from the sand and salt up on the nose area where it first hits, it's a white hull though. Last time I buffed the hull it looked new again, so whatever is there doesn't bother me.

I know Sgrem had major issues, but I've had this boat on two different makes of trailers with bunks in different locations. There is no wear where the hull rides on the bunks. Original trailer was a Magnum and this newer trailer is a 2016 Coastline.

I lived on Padre Island for 7 years with this boat and a couple others. I launched this thing at the POA launch almost weekly, sometimes more when I could sneak away from work.
bigrebar is offline   Reply With Quote Quick reply to this message
Old 10-23-2019, 05:35 PM   #29
richg99
richg99
 
richg99's Avatar
 
Join Date: Aug 21 2004
Location: North Houston (FM1960/Champions area)& Tenn. in the Summers
Age: 80
Posts: 6,564
Rep Power: 21487032
richg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Piraterichg99 has been promoted to Pirate
I've put plastic PVC Gutter Downspouts on my tinnys for years now.

Amazing, (given how thin the material is), that 2 or 3 years later and lots of launches, that they haven't worn through.

About $15.00 total cost including nails.

richg99
https://www.tinboats.net/forum/viewt...37&hilit=bunks
richg99 is offline   Reply With Quote Quick reply to this message
Old 11-13-2019, 05:28 PM   #30
doktrred
Registered Users-pm+
 
Join Date: Sep 17 2018
Location: Highland Lakes area central Texas
Posts: 52
Rep Power: 0
doktrred is a Landlubber (+10 to -10)
I had the same problem with my 99 Pathfinder. I ended up putting an extra set of bunks forward of the bunks that were on the trailer. They spanned the two front cross members, and were located closer to the keel of the boat. Seems to have solved the problem for me.
doktrred is offline   Reply With Quote Quick reply to this message
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the 2CoolFishing forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:26 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2019
© 2013 Noreast Media, LLC | Terms of Service | Contact Us | Advertise