2CoolFishing (https://www.2coolfishing.com/ttmbforum/index.php)
-   DIY (Do it yourself) forum (https://www.2coolfishing.com/ttmbforum/forumdisplay.php?f=99)
-   -   Welding cable/terminal adaptor question (https://www.2coolfishing.com/ttmbforum/showthread.php?t=2462385)

reese 12-22-2017 08:54 PM

Welding cable/terminal adaptor question
2 Attachment(s)
OK, I'm trying to get from the smaller Twist-Mateā„¢ Receptacle with 4 AWG cable that is standard on the Lincoln Square Wave machine to a larger & longer set of welding cables, maybe 1 or 2 AWG but those connectors are larger. Is this what I need ? I don't want to change out the connectors in the machine because then the TIG leads would not fit.
I only see Twist-Mate on Lincolns documents, the other sites I am finding adapters do not reference their terminology. I am seeing LC-10, LC-40, DINSE and CAM LOCK.

TwoKewl'er 12-23-2017 09:20 AM

looks like your on the right track....if you didnt know Profax is in Pearland an Associated w/s is also so I'm sure they can hook ya up

Carry on

All times are GMT -5. The time now is 06:35 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Resources saved on this page: MySQL 21.43%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright 2019