2 Cool Fishing Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
26,822 Posts
The pic

Its located at the rear of your engine at the lower cowling ,its got a 1" water line connected to it.Try cleaning the spring and the valve itself the valve might not be closing all the way .There is a rubber seat on the inside of the motor that might be worn or debris build up. I would change T-stats and mating surfaces also.Good luck
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top