2 Cool Fishing Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
206 Posts
I have a done a couple of rods with the pac bay minima seat. I dont consider myself in anyway an expert but this is how i do i. I use the fuji graphite arbors to make up the gap on the front peace of the seat the rear has fit snug so i havent had to fill any gaps. I use an old reel foot with a level attached to line the two pieces up while epoxy dries. hope this helps.

MG
 
1 - 1 of 1 Posts
Top