2 Cool Fishing Forum banner

Question for you fiberglass folks

578 Views 5 Replies 4 Participants Last post by  los is 7
How hard is it to lay a coat of glass matt on a flat surface and get a decent finish.

I am building a bird house out if 1" thick foam insulation. I would like to cover this in glass and have a relatively nice smooth surface. It is all flat work and of course 90 degree corners. Im thinking the inside just needs to be painted with resin.This house is 31" x 26" x10",single story with a gable roof. No bathroom or kithchen all bedrooms.........rotflmao

I'm a pretty handy DIY'er so if I do it ,,,send the tips ASAP

1 - 1 of 6 Posts
Do a test first to see if the resin will eat up the foam. You see your masterpiece melt before your eyes.
Good luck, Bob
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.