2 Cool Fishing Forum banner
1 - 1 of 1 Posts

· Registered
1,340 Posts
Discussion Starter · #1 ·
I had cut boards, fitted, placed after Rita. Thought I was ready for next hurricane. Thursday go to put up boards and the new vinyl double paine windows had installed since Rita would not allow the pylox to engage. I tried revrseing them but did not trust the grip.

I wound up drilling holes in my brick with masonry bit and sticking 1/4" bolts in the holes to hold the plywood in place. I took pics of the pylox properly placed and some reversed. I lastly placed screws above the plywood into the wood trim. I guess will see if it holds.



1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.