2 Cool Fishing Forum banner

motor wont fire over

1193 Views 6 Replies 5 Participants Last post by  Bigwater
i was getting ready for some fishing this weekend, i went to check on every thing . hit the key and the motor turns but will not fire up?!?!? so i check the fuel thats good . my battery is alil low ? fuel is goin to the injectors i can smell it coming throw the exhaust.
any ideas on why she is not firen up ? its a 150 yamaha ox66 trp . this is the first time i have had a problem with it.
1 - 7 of 7 Posts
When you turn on the key with the engine cover off on the left front of motor looking at it from the back ,the silver tank in the front you should here the pump should come on for 5 sec, if not then probably relay that runs the med pressure pump. You can use a tire gauge on the schrader valve and see if it is getting 35-40 psi to go to the injectors, BECAREFULL!!!!!!!!! fuel could spray when putting the tire gauge on the valve. i will be online for a little working on a quote, so i may be able to help you.
Check your kill switch. My dad's did that once and it was the kill switch doing it. It had broken inside the switch..
IS THE HORN GOING OFF DURING CRANKING??? IF IT IS KILL LANYARD!!
IS THE HORN GOING OFF DURING CRANKING??? IF IT IS KILL LANYARD!!
True and sorry missed you smell fuel from the injectors,
no horn goin off kill switch is good. goin to check the preshure tomarrow got to got to work the bar here in a bit . thanks for the info . i will send a report tomarrow.
Make sure you have oil in the tank under the cowling. Sometimes that happens.

Biggie:biggrin:
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top