2 Cool Fishing Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
4,063 Posts
Discussion Starter · #1 ·
The weather finally broke long enough to make some sawdust. This is one of my favorite projects...fairly simple and very functional for the little guys. This rocker is made with good old South Texas Mesquite, complete with some worm holes. The screw holes are plugged with Texas Ebony. It needs about three more coats of MinWax and then a good wax buff. It's fun be Santa's helper! gb
 

Attachments

·
Registered
Joined
·
4,063 Posts
Discussion Starter · #5 ·
Thanks for the compliments. I just noticed in that one picture the head really looks mis-shaped..it's just the camera angle. The wood was 6/4 sawn many years ago down in Kingsville. I surfaced down to 1" finished and then ran it through the drum surface sander...so it's a hair under 1". Mesquite is still one of my favorites! The TX Ebony plugs came from Brownsville. Sure wish I would have picked up a bunch more of that wood. gb
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top