2 Cool Fishing Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter · #1 ·
I know this may same like dumb questions to some of you, but this is all new to me. Any suggestions on a gas and rpm rauge not working? why? should I replace them?
 

·
POC chunker
Joined
·
9,209 Posts
If they're both dead, look for a fault common to both gauges. Something like a bad ground wire they both share, or a bad power wire that feeds them.
 

·
Registered
Joined
·
305 Posts
Weak link on fuel would be the sending unit in the tank. Touch the pink wire to the grounded tank with a jumper wire and see if the guage flashes to full. The tach problem may be the charging rectifier on the motor.
 

·
Registered
Joined
·
3,159 Posts
i use rpm to figure my best gas usage . 4000 rpm is what i like without it i may waste gas by going too fast or not fast enough to plane, i dont use speed at all , i ignore it .
 
1 - 6 of 6 Posts
Top