2 Cool Fishing Forum banner

1 - 3 of 3 Posts

·
Offshore fishing the hardest fun I have
Joined
·
83 Posts
Discussion Starter · #1 ·
I am in the process of restoring a 1957 redfish 15 ft shark
before i paint the hull i need to fill small cracks on the hull
very small cracks but i dont think the paint will fill them
By the way it is fiberglass Thanks for any help
 

·
Registered
Joined
·
89 Posts
Best bet is clean cracks with acetone, fill with GitRot, light sand after dry. Clean again with acetone and then fill the cracks with West System epoxy mixed with some 407 filler. Sand smooth after it cures and you can prep for paint.
Any West Marine has all this stuff. Good luck
 
1 - 3 of 3 Posts
Top