2 Cool Fishing Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
721 Posts
Discussion Starter · #7 ·
Gb, I had to use a bit of CA glue due to the imperfections of these antlers. They are pretty old. After the CA I sanded with 400 grit and then wet sanded with 2000 grit. I then applied the HUT Ultra Gloss Plastic polish. If it still isn't as shiney as I like, I wet sand again and repolish.
 
1 - 7 of 7 Posts
Top