2 Cool Fishing Forum banner

Bearing lubrication question

928 views 1 reply 2 participants last post by  Pocketfisherman 
#1 ·
Got a question that may have been discussed before. I have the Accu Lube system on my travel trailer. This weekend I pulled the black rubber cover and added grease via the zerk in the center. One wheel would not accept any grease. I thought bad zerk. I pulled the zerk and attached it the grease gun and it worked fine. Put it back on the spindle and again I cannot get grease in there. This is the type system where grease goes in thru the center in back towards the front.

Anyone have any idea or experienced this before. Wanted to see if I could get some feedback since my family and I are headed to the hill country this weekend with it. I was pulling the zerk again tonight and inserting a coat hanger to see if something is blocking it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top